Bilt Hamber Dynax UC Clear Film Anti-Corrosion Wax 750ml

Product Information

Use a brush, roller or spray to apply Dynax-S50. Atomisation into enclosed cavities and voids is recommended to ensure thorough coverage of all surfaces. Dynax-S50 contains highly polar corrosion inhibitors that are able to displace surface moisture; very wet surfaces should be pre-treated using Bilt-Hamber Ferrosol. In the event the steel is substantially corroded, then omit Hydrate 80 and use Electrox, never use both together. So the choice is either Hydrate 80 or Electrox depending on cleanliness achieved at the prep stage. Dynax-S50 is also able to arrest existing corrosion and provide long-term protection to both heavily corroded and corrosion-free surfaces.

Dynax-UC can be easily removed if required with simple solvent wipes or alkaline degreasers after the aggressive winter months pass, or left in place for prolonged protection. and did you apply anything else before/after?Yes that's the one, except it's now been largely superseded by Rust Encapsulator. If you want the very best treatment possible, then take everything down to bare metal and treat any "pitted" areas with Hydrate 80. Let it do its thing for the longest time it suggests, then treat it a second time, using brush strokes against what you did first time round. Dynax-S50 is a high-performance anti-corrosion wax that provides exceptionally long-lasting protection to steel surfaces. It creeps into welded seams and seals surface defects. Dynax-S50 forms a soft, brown, wax-like film that self-heals in the event of disruption. It is also able to arrest existing corrosion and to provide long-term protection to pre-corroded and corrosion-free surfaces. I was in a rush so I just left the casing in RCP which is permissible as it's a non-porous coating.

How To Use

It creeps into welded seams and seals surface defects. It forms a soft, brown, wax-like film that self-heals in the event of disruption. The panel fronts as removed are difficult to asses as corrosion streaks and marks are left as during the test the unprotected panel edges allow corrosion deposits to pour down the vertically positioned panels. Dynax-S50 is so effective and versitile that it has been used with superb results to protect voids and cavities in steel boats, vessels, off shore installations and other steel structures subject to severely corrosive atmospheres. Under bodies will benefit from steam cleaning or power washing, using our Surfex-HD degreaser/ all-purpose cleaner will provide great results, the surface should be well rinsed with plenty of clean water and then dried. For best results, the surfaces should be wiped over with white spirit or similar. The range offers asulphonate rich waxy film which provides unparalleled protection to car underbodies.

As you can see from the salt-spray test demonstration, Dynax-S50 clearly outperforms other highly rated cavity waxes. Infact, after much testing Dynax-S50 was presented with the best cavity wax accolade from University of Hertfordshire – School of Engineering and Technology.The graphic below shows Dynax-S500 treated on half a metal panel after 2084 hours in the salt spray chamber. We competed with six other rated cavity waxes in this extensive test, including brands such as Robuster, Hammerite and Mike Sanders. the biggest issue with the focuses in my limited experience (dad had a 51 plate estate mk1B) from nearly new Dynax-S50 is tolerant of a broad range of application pressures and will form a coherent film upon application. Dynax-S50 will increase in viscosity at low storage temperatures. These standardised test panels have been removed from an ASTM B-117 hot salt spray trial after an extremely aggressive 2000 hours – the rear of the panels show that the steel left unprotected is almost corroded through.

The Easiest Way To Protect Your Car.....In Seconds!!

The final picture in the series below shows Dynax-S50 protected metal is still in exceptional condition. and the Rear arch lip where the spot welds are as that carpet holds loads of water grit salt and the rest, it flaps about and basicly sandpapers the paint on the rear lip off.....

The advanced metal seeking anti-corrosion molecules which form Dynax-S50 are able to displace water, so even damp surfaces can be protected, these same molecules arrest and prevent corrosion even on already rusty surfaces and provide remarkable self-healing abilities if the film is damaged. Whilst Dynax-S50 is primarily a cavity rustproofing compound it’s also able to prevent corrosion in a multitude of mud traps and water collecting voids. Dynax-S50 has been used with superb results to protect voids and cavities in steel boats, vessels, offshore installations and other steel structures subject to severely corrosive atmospheres. For non-aerosol dispensed Dynax-S50, warming the container (loosen cap first) by standing in a hot water bath will further reduce viscosity and is beneficial where deep crevice protection is required. Never heat aerosol dispensed product. Ensure that cavities are left unclosed for a period of 48 hours to allow the escape of carrier materials before bunging or stopping.

Dynax-S50 has been proven to substantially outperform competitors cavity waxes in salt-spray trials under conditions of ASTM B117. Here are the results: These 750ml aerosols are equipped with a unique valve. Cans are charged to 70 psi and work on their side and even upside down.

The 750ml aerosols are equipped with a unique valve. Cans are charged to 70 psi and work on their side and even upside down. Dynax-S50’s soft-film is optimised for enclosed cavities where extremely corrosive conditions develop. Dynax-S50 is also recommended for protection of valuable machinery and components in transit, machine tools, moulds etc. Dynax-S50 can be removed using suitable solvent. Dynax-S50 is not formulated for prolonged exposure to ultra-violet (UV) light.Dynax-S50 has a high solids content – over 50%, it’s this content that forms the anti-corrosion coating, and whilst other high solids materials don’t penetrate sufficiently Dynax-S50 creeps by capillary action deeply into seams, flanges and folded edges, in side-by-side trials Dynax-S50 has been proven to creep significantly further than other cavity waxes, some with solids contents as low as 25%.